- 11 -

FIGURE 2-6 GIGABIT EXPANSION MODULE

WGSW-C1GT Module Status LEDs WGSW-C1SX Module Status LEDs
TABLE 2-9 WGSW-C1GT/SX STATUS LEDS
WGSW-C1GT
LED Color Function
1000 Green Lights to indicate that the Switch is sending or receiving
data at 1000 Mbps.
100 Green Lights to indicate that the Switch is sending or receiving
data at 100 Mbps.
10 Yellow Lights to indicate that the Switch is sending or receiving
data at 10 Mbps.
FDX/COL Yellow
Lights green to indicate that the port is operating in
full-duplex mode.
Blinks orange periodically to indicate that the connection
is experiencing collisions.
Act Green Lights to indicate that the connection is acting.
TABLE 2-10 WGSW-C1SX STATUS LEDS
WGSW-C1SX
LED Color Function
1000 Green Lights to indicate that receiver of fibre port is in
normal optical input levels.
Act Green Lights to indicate that the connection is acting.
FDX/COL Yellow
Lights to indicate that the port is operating at
full duplex. This port does not support half
duplex.
2.3.2 100Base-FX Expansion Module
Figure 2-5 show that front panel of 100Base-FX expansion module. Table 2-7 show that modules
status LEDs.