Polar RCX3 - page 10

Pairinga new optional* sensor with the
trainingcomputer
Beforeparticipatng in an event, make
sureyou perform the pairing process
beforehand.This is to prevent
interferencedue to the long-range data
transmission.
1. PressUP to enter Settings. Select,
forexample, Sport profiles >
Running>Stride sensor >
Searchnew.
2. Searchingfor new stride sensor
isdisplayed. Stride sensor found
isdisplayed.
3. IfStride sensor not found,Try
again?YES/NO is displayed, check
thatyour stride sensor is correctly set
upand select YES. Press BACK to
cancelthe search.
IfOther stride sensors interfering.
Movefurther. Try again? is displayed,
movefurther away from interfering
sensorsand press OK to start the search
again.
*OptionalPolar sensors include s3+ stride
sensor,G5 / G3 GPS sensor W.I.N.D., CS speed
sensorW.I.N.D. and CS cadence sensor
W.I.N.D.For more information on setting up the
optionalsensor, see the user manual of sensor
inquestion.
10 ENGLISH