ChangingTraining Computer Battery
1. Usethe battery cap tool to open the battery cover. Position
thetool so that it fits in correctly on the top of the back cover
andturn it from CLOSE to OPEN. Remove the battery cover.
2. Liftthe battery out carefully. Be careful not to damage the
metalsound element (*) or the grooves. Insert a new battery
withthe positive (+) side outwards.
3. Closethe cover with the battery cap tool and re-enter the
basicsettings.
ChangingHeart Rate Sensor Battery
1. Leverthe battery cover open by using the clip on the strap.
2. Removethe old battery from the battery cover with a suitable
sizedsmall ridgid stick or bar, such as a toothpick. A
non-metaltool is preferable. Be careful not to damage the
batterycover.
3. Insertthe battery inside the cover with the negative (-) side
outwards.Make sure the sealing ring is in the groove to
ensurewater resistance.
4. Alignthe ledge on the battery cover with the slot on the
connectorand press the battery cover back into place. You
shouldhear a snap.
Dangerof explosion if the battery is replaced with wrong type.
ENGLISH 19