Polaris P1000i, P2000i manual First USE Instructions, Adding Engine Oil

FIRST USE INSTRUCTIONS

Adding Engine Oil

Failure to use the recommended 4-stroke engine oil may result in engine damage, see page 62 for recommended oil and capacity.

1.Place generator on flat, level surface. Open the service door. See page 46.

2. Remove the oil filler cap /
dipstick (A).	A

3.Fill the engine crankcase with the specified amount of engine oil. See page 62.

4.Insert the dipstick into the filler neck, without screwing it in.

5.Remove the dipstick and verify that the oil level is at the upper limit (B). Add additional oil and inspect the level as needed until the upper limit has been reached.

6.Re-install the dipstick (A). Use a clean shop rag to clean any spilled oil.

7.Re-install the service door.

Upper Level

B

22