Navigating with GPS

Your GPS system is a convenient way to navigate to a location, determine your current location, and plan a travel route.

Getting ready for GPS navigation

1.Connect the system to power.

2.Rotate the built-in GPS antenna (on the underside of the system) out until it’s horizontal, or plug in the external GPS antenna. (The external antenna is magnetized, so you can mount it on the outside of your vehicle.)

Important: While using the built-in GPS antenna, make sure that the antenna maintains a horizontal position (parallel with the ground).

Note: To disconnect the external antenna cable, twist the connector while pulling it away from the GPS.

3.Turn on the system or press the MODE button to change to NAV (GPS) mode.

Important: Some buttons and menu items may be unavailable until a GPS signal is detected.

4.Press the MAP button to display the current map on the screen when a GPS signal is detected. Your speed is displayed on the bottom bar.

5.Tap the bottom bar to toggle between the speed display and the current street display.

27

Page 29
Image 29
Polaroid MGX-0550 operation manual Navigating with GPS, Getting ready for GPS navigation