Connect the Standard Equipment
Connect the Standard Equipment
1
Connect the PowerCam Plus to the Polycom Instructor RP.
1.Place the PowerCam Plus on the video conferencing shelf.
2.Connect one end of the PowerCam Plus cable to the VSX 8000 system as described in the Polycom Setting Up the VSX 8000 System document. The VSX 8000 system is located above the annotation box in the Polycom Instructor RP cabinet.
3.Connect the other end of the PowerCam Plus cable to the PowerCam Plus as described in the Polycom Setting Up the PowerCam Plus document.
Note Do not power on the PowerCam Plus or any of the standard equipment until you are ready to power on the complete system as described in Power on the System on page 10.
2
Connect the Polycom microphone to the Polycom Instructor RP.
1.Place the microphone on a table or other flat surface.
The microphone performs best if you place it correctly. For information about microphone placement, refer to the Polycom Administrator’s Guide for the VSX Series.
2.Find the microphone cable in the back of the Polycom Instructor RP system. One end of the cable is already connected to the system. Connect the other end to the microphone.
You can connect up to three
5
