Complete the Equipment Installation
Complete the Equipment Installation
1
Connect the IR receiver for the wireless keyboard to the Polycom Instructor RP system.
1.Find the IR receiver in the back of the Polycom Instructor RP system. The cable for the receiver is already connected to the system.
2.Unwrap the IR receiver.
3.Stick the Velcro® to the top of the receiver and to the bottom of the video conferencing shelf.
4. Attach the IR receiver to the bottom of the video conferencing shelf.
Note If you do not want to attach the IR receiver to the bottom of the video conferencing shelf, you can attach it elsewhere. Just be sure that there are no obstacles blocking the IR transmission from the keyboard to the receiver.
For more information about the IR receiver and wireless keyboard, refer to the Sejin Electron Inc. User’s Manual for Windows 95/98 Freeboard document.
2
Reinstall the cabinet’s rear access panel and close the front doors.
For more information, refer to the “Removing the Rear Access Panel” section of the Rear Projection SMART Board 3000i Installation Guide.
9
