Setting Up the Polycom Instructor RP
Unpack and Position the System
1
Work with another person to unpack the Polycom Instructor RP system.
To perform this step, follow the instructions in Unpacking the Rear Projection SMART Board Interactive Whiteboard that is attached to the outside of the crate.
Caution Be sure the wheels are unlocked before you try to move the system.
Be careful when you move the system. Quick stops, excessive force, and movement over uneven surfaces can overturn the system.
2
Work with another person to roll the Polycom Instructor RP off the pallet and move it to the room where you will be using it.
• Position the system so that it does not face toward a window or other source of bright light.
• Leave space in front of the system so that you can open the doors.
•Leave space behind the system so that you can work.
• Set up the system in an area with as little dust, humidity, and smoke as possible.
•Lock the wheels when the system is in the desired place.
2
