Nortel: WLAN Security Switch 2300 Series with AP-2330
Example Configuration Files (For Reference Only)
The following configuration file provides an example configuration to support SpectraLink Wireless Telephones using WPA-PSK:
#Configuration nvgen'd at 2007-7-26 22:51:55
#Image 5.0.11.4.0
#Model 2360
#Last change occurred at 2007-7-26 22:36:12 set ip route default 192.168.1.1 1
set system name WSS2360
set system ip-address 192.168.1.50 set system countrycode US
set timezone EST -5 0
set service-profile Voice ssid-name Voice
set service-profile Voice auth-fallthru last-resort set service-profile Voice wpa-ie enable
set service-profile Voice psk-phrase enter-a-passphrase set service-profile Voice auth-psk enable
set service-profile Voice auth-dot1x disable set service-profile Voice attr vlan-name Voice set enablepass password enable-password
set user admin password admin-password
set radio-profile default service-profile Voice set radio-profile default dtim-interval 3
set radio-profile default auto-tune channel-config disable
set radio-profile default active-scan disable set radio-profile default qos-mode svp
set dap 1 serial-id stpw20kc3 model 2330 set dap 1 name WAP-2330-2
set dap 1 radio 1 channel 11 tx-power 10 mode enable set dap 1 radio 2 channel 40 tx-power 10 mode enable set port type ap 1 model 2330 poe enable
set ap 1 name WAP-2330-1
set ap 1 radio 1 tx-power 10 mode enable
set ap 1 radio 2 channel 44 tx-power 10 mode enable set ip https server enable
set port poe 1 enable set vlan 1 name Data set vlan 1 port 8 tag 1
PN: 1725-36082-001_G.doc | 35 |
