Polycom 1725-36082-001 manual Radio Profile configuration, Access control list

Configuration Guide

#Enables pre-shared-key authentication. set service-profile Voice auth-dot1x disable

#Disables 802.1x authentication.

set service-profile Voice attr vlan-name Voice

#Specifies the VLAN name to map the voice handsets traffic to.

Radio Profile configuration

The default Radio Profile needs to be modified to disable certain features to support the handsets. To modify the default Radio Profile using CLI:

set radio-profile default service-profile Voice

#Maps the voice service profile and SSID to the radio profile. This determines which 802.11 radios advertise and can support voice handsets.

set radio-profile default dtim-interval 3

# Sets the DTIM interval to support push-to-talk.

set radio-profile default auto-tune channel-config disable

#Disables automatic channel assignment for radios assigned to the radio profile. A static channel configuration is recommended to provide a stable and optimum RF environment for the handsets.

set radio-profile default active-scan disable

#Disables active-scanning which prevents the radios from going off-channel and disrupting voice services.

set radio-profile default qos-mode svp

#Sets the QoS mode to SVP. WMM support is not currently available on the SpectraLink Wireless Telephones.

Access control list

To create an access control list (ACL) that allows and prioritizes IP protocol 119 (SVP) with a Class of Service (CoS) 7 and allows all other IP traffic on the Voice VLAN using CLI:

set security acl ip SpectraLink permit cos 7 119 0.0.0.0 255.255.255.255 0.0.0.0 255.255.255.255

#Creates an ACL that matches protocol 119 (SVP) and marks it with a CoS 7.

set security acl ip SpectraLink permit 0.0.0.0 255.255.255.255

#Creates an ACL that matches all traffic and ports. commit security acl SpectraLink

#Commits and applies the ACL.

12 PN: 1725-36082-001_G.doc