Configuration Guide
set vlan 2 name Voice set vlan 2 port 8 tag 2 set igmp disable vlan Voice
set interface 1 ip 192.168.1.50 255.255.255.0
set security acl ip SpectraLink permit cos 7 119 0.0.0.0 255.255.255.255 0.0.0.0 255.255.255.255
set security acl ip SpectraLink permit 0.0.0.0 255.255.255.255
commit security acl SpectraLink
set security acl map SpectraLink vlan Voice in set security acl map SpectraLink vlan Voice out
The following configuration file provides an example configuration to support SpectraLink Wireless Telephones using WPA2-PSK:
#Configuration nvgen'd at 2007-7-26 22:53:41
#Image 5.0.11.4.0
#Model 2360
#Last change occurred at 2007-7-26 22:53:34 set ip route default 192.168.1.1 1
set system name WSS2360
set system ip-address 192.168.1.50 set system countrycode US
set timezone EST -5 0
set service-profile Voice ssid-name Voice
set service-profile Voice auth-fallthru last-resort set service-profile Voice rsn-ie enable
set service-profile Voice cipher-tkip disable set service-profile Voice cipher-ccmp enable
set service-profile Voice psk-phrase enter-a-passphrase set service-profile Voice auth-psk enable
set service-profile Voice auth-dot1x disable set service-profile Voice attr vlan-name Voice set enablepass password enable-password
set user admin password admin-password
set radio-profile default service-profile Voice set radio-profile default dtim-interval 3
set radio-profile default auto-tune channel-config disable
set radio-profile default active-scan disable set radio-profile default qos-mode svp
set dap 1 serial-id stpw20kc3 model 2330
set dap 1 | name WAP-2330-2 | |
set dap 1 | radio 1 channel | 11 tx-power 10 mode enable |
36 | | PN: 1725-36082-001_G.doc |