User Guide: SpectraLink 8020/8030 Wireless Telephone with SIP

To set the handset for PTT vibrate only, enable PTT Vibrate and set the tone volume to zero.

System Info

Displays the IP address of the highlighted menu item. The IP address appears in the upper portion of the screen below the words System Info.

Phone IP Address

Displays the IP address currently assigned to the handset by the SVP

Server.

Alias IP Address

Displays the IP address used by the call server to send communications to and from the handset via the SVP Server

SVP IP Address

Displays the IP address of the SVP Server.

OAI IP Address

Displays the IP address of the server used for custom applications when defined on an Open Applications Interface (OAI) Server.

Firmware Version

Displays the software version running the handset. The MAC address is the hardware identification number and is set at the factory. Three code numbers correspond to the three software files that each software version uses.

Emergency Dial

(SpectraLink 8030 Wireless Telephone only)

Emergency Dial will appear if it has been enabled by the system administrator. The Emergency Number/Name options allow you to check the number and name that is dialed when the Emergency Dial button is pressed.

32

1725-36165-001-G.doc

Page 32
Image 32
Polycom 1725-36165-001 manual System Info