Polycom® RSS™ 4000 User Guide
will change to
.
Repeatedly clicking on the button on the left
will pause/continue the
recording operation, and the buttons will change to
.
Clicking on the button on the right 
will stop recording. Clicking again on this button will disconnect the H.323 connection.
Each H.323 connection status display includes: the IP address of the H.323 endpoint that establishes a connection with Polycom® RSS™ 4000, the H.323 ID, the time the connection was established, the recording room joined, recording status, packet loss rate, the audio and video protocols, and whether it is H.239 enabled. Recording status has three kinds of displays. When it shows as “Idle”, it means it has not started recording or playing video. When it shows “Playback”, it means it is in the process of playing video. When it shows “Recording”, it means it is in the process of recording. Packet loss rate shows the statistics for the packet loss between the endpoint and the uplink with the Polycom® RSS™ 4000, tabulated once every 5 seconds.
The H.239 column displays whether or not H.239 is enabled on the endpoint, but does not show if the Polycom® RSS™ 4000 is recording or playing back H.239. It only identifies if this endpoint has H.239 capability.
H.323 connection status display is refreshed every 30 seconds.
