Polycom 3150-30828-001 manual Logger Settings, Please contact your supplier

Chapter 2 - Web User Interface (UI)

Item

Details

Disable H.323	This item is not checked by default. If selected, it will
	disable the H.323 connection’s playback function and "Play
Playback	Video" will be disabled in the Onscreen UI main menu.
	This setting does not affect playback from Web site.
	If this function is enabled, the system will automatically
	encrypt H.323 calls with other endpoints or MCUs with
	AES encryption, if the endpoint or MCU supports AES.
Enable AES	Note: AES encryption is an optional function of the
	Polycom® RSS™ 4000 and will not be available until a
	license is purchased and activated. To obtain this function,
	please contact your supplier.
	This option is enabled by default.
Enable H.264 Content	When checked, the Polycom® RSS™ 4000 will support
	H.264 content sending from endpoint.

Clicking on the "View Security Updates Already Installed on this Device" link on the bottom of the page will look up a table of system updates already installed on the Polycom® RSS™ 4000 device, as shown in below figure. Clicking the "Back" button on this page will return the user to the previous System Settings page.

Figure 2-19Security Updates Table

When synchronizing the device’s system time with an NTP server, the user must set an active NTP server address. Since the communication between the device and the NTP server requires a certain time, the system time may not be instantly updated.

Logger Settings

Polycom® RSS™ 4000 offers a background log backup function. The log files are used to troubleshoot the system by the Polycom Certified support experts.

Clicking on "System Configuration ->Logger Settings" allows the user to configure the Polycom® RSS™ 4000 system log information, the log models generated, and the size of the log files. In general it’s recommend not to modify the default setting of this section, unless instructed by the Polycom certified support expert.

2-16