Polycom® RSS™ 4000 User Guide
Stop Recording
Use the remote control to select Stop to stop the current recording and generation of a video file. The user will hear the IVR message "The conference recording has ended".
The Polycom® RSS™ 4000's internal storage will reserve 500 MB of storage space. Recording will be stopped and a video file created if the free hard drive space falls to less than 500 MB during a recording.
When the hard drive has less than 500 MB of available space, an IVR message will tell the user that there is insufficient hard drive space if the user tries to start a recording.
If no audio/video data is received for 30 consecutive seconds during the recording process, the Polycom® RSS™ 4000 will terminate the connection.
Live Streaming
When the Live streaming option is selected, the RSS can allow web users to view the bit stream while a non- 720p 50/60 fps or 1080p video is being recorded. The RSS will decode the audio/video bit stream sent from the endpoint, and will convert it in
initiate playback of the video, as shown below. Click on the button on the Live Streaming menu to view the video in
Figure 3-6 Streaming a video
Immediate Recording
When an endpoint's immediate recording function has been enabled, the Polycom® RSS™ 4000 will automatically start a recording (if recording resources are available) when that endpoint calls into the Polycom® RSS™ 4000.. This function ensures that the user of this endpoint will not be prompted with onscreen menus. To enable an immediate recording the user must have Administrator privileges to the Polycom® RSS™ 4000. Enter the "Account management