Porter-Cable DSR2210 manual Recording a programme that must be broadcast later

PROGRAMMA’S OPNEMEN

VERGEET NIET DE VIDEORECORDER

TE PROGRAMMEREN

124.09 PLANETE 15:10-16:10

224.09 PLANETE 15:10-16:10

3PROGRAMMA BESCHIKBAAR

4PROGRAMMA BESCHIKBAAR

5 PROGRAMMA BESCHIKBAAR

6 PROGRAMMA BESCHIKBAAR

7PROGRAMMA BESCHIKBAAR

8 PROGRAMMA BESCHIKBAAR

OK PROGRAMMA’S OPNEMEN

EWISSEN

A TERUG NAAR MENU

1

PROGRAMMA￿S OPNEMEN

PROGRAMMA 1

VERGEET NIET DE VIDEORECORDER

TE PROGRAMMEREN

DATUM	13.08
KANAAL NUMMER	6	OF	E

STARTTIJD 06:00

EINDTIJD 08:00

HERHALING EENMALIG

OK BEVESTIGEN INSTELLING

E KEUZE VAN KANAAL

A TERUG NAAR VORIGE SCHERM

6.3.2Recording a programme that must be broadcast later

You first have to preselect your videorecorder on the decoder. Then you will have to program your digital receiver so that it will switch on at the right time and on the right channel.

You can program the receiver from the MENU (MENU button) or from the EPG (EPG-button).

MENU button

•Press MENU and 1, and then press the number of the programme.

Choose a sequential number for the recording. This number is not important: you can begin with 1, than choose 2, 3, 4, etc...

•Now select the date, the number of the channel, the start and finish times and the frequency of the recording - daily, weekly or monthly.

•Follow then the instructions that appear on the screen.

WARNING!

-If there is a parental lock on the channel you wish to select, you first have to enter your pincode.

-Do not forget to switch on your videorecorder before recording the programme.

-You can record maximum eight programmes.

6.3.3Recording a programme from the electronical programme guide (EPG)

You can only record the channels from the electronical programme guide if you have a subscription. You can do it as following:

-Press EPG

-Select PROGRAMMA-OVERZICHT

-Choose the programme you want to record and confirm your choice by pressing the OK button.

WARNING!

When you choose a programme which has already begun, you cannot record it: you can only watch it.

•Follow the instructions appearing on the screen to program the record.

•If you want to record at a time which has already been selected, you will be informed of this.

•Set the videorecorder on the preselection for the decoder.

•Do not forget to switch on your videorecorder too.

THE MENU 17

English