CARTON CONTENTS
UNPACKING AND CHECKING CONTENTS
Carefully unpack the table saw and all its parts, and compare against the list below and the illustration on the next page. With the help of an assistant place the saw on a secure surface and examine it carefully.
!WARNING
•To avoid injury from unexpected starting or electrical shock, do not plug the power cord into a source of power during unpacking and assembly. The cord must remain unplugged whenever you are adjusting/ assembling the saw.
•The saw is heavy and should be lifted with care. Get the assistance of someone to lift and move the saw.
•If any part is missing or damaged, do not attempt to assemble the table saw, or plug in the power cord until the missing or damaged part is correctly replaced.
TABLE OF LOOSE PARTS
STAND
ITEM DESCRIPTION | QUANTITY | |
A. | Leg set | 1 set |
| Front right leg - no. 2 | 1 |
| Rear right leg - no. 3 | 1 |
| Front left leg - no. 5 | 1 |
| Rear left leg - no. 6 | 1 |
B. | Right leg support - no. 1 | 1 |
| Left leg support - no. 4 | 1 |
C. | Leg assembly hardware bag | 1 set |
| Square neck bolts | 22 |
| Hex nuts | 22 |
D. | Front leg support - no. 7 | 1 |
E. | Rear top leg support - no. 8 | 1 |
F. | Rear bottom leg support - no. 9 | 1 |
Foot pads | 1 set | |
G. | Caster assembly bracket | 1 |
H. | Front casters / rear casters | 2 each |
I. | Caster assembly hardware bag | 1 set |
| Socket hex bolt - long | 1 |
| Socket hex bolt | 2 |
| Socket hex bolt - short | 2 |
| Hex nuts | 3 |
| 6 mm hex key | 1 |
ITEM DESCRIPTION | QUANTITY | |
J. | Storage parts |
|
| Miter guage storage | 1 |
| Rip fence storage | 1 set |
| Power cord storage | 1 set |
| Blade guard assembly storage | 1 set |
K. | Storage parts hardware | 1 set |
| Screws - long | 2 |
| Screws - short | 2 |
| Nuts | 4 |
| Screws with washers | 6 |
TABLE OF LOOSE PARTS
TABLE SAW
ITEM DESCRIPTION | QUANTITY | ||
L. | Table saw assembly | 1 |
|
M. | Right / left table extension | 1 each | |
N. | Front table extension rail | 1 set | |
O. | Rear table extension rail | 1 set | |
P. | Hex bolts | 4 |
|
Q. | Table extension hardware bag | 1 set | |
R. | Front rail covers | 1 set | |
S. | Front rail hardware bag | 1 set | |
| Hex bolts - long | 4 |
|
| Hex bolts - short | 2 |
|
T. | Square nuts | 6 |
|
Rear rail hardware bag | 1 set | ||
| Hex bolts | 6 |
|
| Hex nuts | 2 |
|
U. | Handwheel, dome nut, handle, nut | 1 each | |
V. | Riving knife | 1 set | |
W. | 1 |
| |
X. | Blade guard | 1 |
|
Y. | Miter gauge | 1 |
|
Z. | Rip fence | 1 each | |
AA. | Blade wrench | 1 |
|
BB. | Push stick | 1 |
|
– 9 –
