POSIFLEX Business Machines PP-8000U, PP-8000L Parallel Connection, LAN Connection, USB Connection

in setup window the switch position 1 to OFF, and position 2 to ON leaving the rest unchanged as factory default setting.

Parallel Connection

The parallel connector is a 25-PIN D sub Male connector at the leftmost location in the connector area for PP-8000. Apply the female end of the parallel cable at this port for parallel application. Please note that when parallel connection is used, there must be no cable connection at the serial port on the printer. Please also note that to keep parallel interface in fast operation, please adjust in setup window the switch position 1 to OFF, and position 2 to ON leaving the rest unchanged as factory default setting.

LAN Connection

The LAN connector is a 8-PIN RJ45 type modular connector at the position left to the power connector in the connector area for PP-8000L. Please use a LAN cable of CAT 5 with proper length to connect the LAN connector on the printer to the LAN HUB as appropriate. Please note that for PP-8000L, there must be no cable connection at the serial port or the parallel port on the printer. Please also note that to keep LAN interface operative, please adjust in setup window the switch position 1 to OFF, and position 2 to ON leaving the rest unchanged as factory default setting. DO NOT CONNECT THE PERIPHERAL DEVICE TO THIS PORT!! The LAN port is 10/100BaseT compliant.

	USB Connection
		The USB connector on PP-8000U is a
		type B USB connector at lower right position
		below the serial port. Use the normal USB Cable
Type A	Type B	(P/N: 21863250800) as in the left	picture to
		connect the type A end to a normal USB port of
Normal USB Plugs		host system. Please visit our	web site
		http://www.posiflex.com	or

http://www.posiflex.com.tw for detailed information of the USB driver installation if required. Please note that for PP-8000U, there must be no cable connection at either the serial port or the parallel port on the printer. Set in setup window the switch position 1 to OFF, and position 2 to ON leaving the rest unchanged as factory default setting.

Peripheral Connection

The peripheral controller is a 6 pin RJ11 type modular jack. With use of Posiflex cash drawer cable 21863018010 (CCBLA-180-1) come with cash drawer, this port can control a Posiflex cash drawer CR3100 or CR3200 or CR4000 or CR4100 or CR-6310. If a Posiflex special split cable 21863023800

Part 7