Page 18
Please notice that if the XP system is improperly turned off before a complete
boot up procedure, the above preset power on control functions will be
disabled until next turning off after a complete boot up.
Storage Device
The standard system storage device is 2.5” SATA HDD in the main unit. This
device can be replaced with an option SATA SSD HDD.
TECHNICAL MANEUVERS Some technical maneuver in XP-3000/3300 series such as serial COM port
+5V/+12V power supply settings is supported in system jumper setting and
printer parameter setting. However, such support is limited to the application
of specific Posiflex peripherals and must be disabled when the Posiflex
peripherals are disconnected. Failure to follow the discipline would result in
electric or fire hazard and such consequences are not covered by product
warranty!
The rest applicable technical maneuvers include system CMOS data reset,
system reset, DRAM upgrades and installation of optional SATA SSD. All
these technical maneuver operations require purchase of applicable Technical
Manual from Posiflex or consultation from Posiflex authorized dealers and
should be handled only by a qualified technician.
T31454