Introduction | 3 |
Media Library (Generation 2 or Generation 3)
•PowerFile Media Library
•Rail Kit box containing:
•2 Outer Rails (Left and Right)
•2 Inner Rails (Left and Right) packed in Outer Rails
•Accessory box containing:
•Registration Card
•Product Information Brochure
•Warranty Card
•1 1394 FireWire Cable
•1 Power Cord
•2 Qualification Media Discs (Generation 3 only)
Note: Do not open the Media Library unit. There are no
WARNING: Opening the cover of the Media Library unit may expose you to visible and invisible laser radiation. Avoid direct exposure to laser beam.
Rack System Precautions
The following safety requirements must be considered when the unit is mounted in a rack.
•The rack design should incorporate stabilizing features suitable to prevent the rack from tipping or being pushed over during installation or in normal use.
•When loading a rack with the units, fill the rack from the bottom up and empty from the top down.
•The maximum operating ambient temperature for the unit is 35°C (94° F). The rack design should take this into consideration.
•The system must be operated with low pressure rear exhaust installation (back pressure created by rack doors and obstacles not to exceed 5 pascals [0.5mm water gauge]).
Active Archive Appliance (A3) v6.5 | PowerFile Confidential | Racking and Installation Guide |
