Installing the Archive Engine | 21 |
4.(Optional) Insert the two M5x24 screws on either side of the server, and then tighten to hold the server in the rack.
5.(Optional) If the drives were shipped in the Archive Engine, PowerFile recommends that you unlatch and reseat the drives before powering on the server. When performing this step, ensure that you do not replace the drives in the wrong slots. That is, make sure you replace the drives back in their original slots; don’t swap the drives around.
6.Attach the front bezel to the chassis.
Active Archive Appliance (A3) v6.5 | PowerFile Confidential | Racking and Installation Guide |
