
Setting Up the A3 System | 65 |
Powering On the Archive Engine (Generation 2)
Once the Media Libraries and optional Cache Expansion Arrays are powered on, and the Media Library LCDs display a message similar to “PowerFile Archive Library,” power on the Archive Engine (Generation 2) by pressing the power button located on the front of the chassis. It will take the Archive Engine
Power Button
Archive Engine (Generation 2) Power Button
The power button is used to apply or remove power from the power supply to the server system. Turning off system power with this button removes the main power, but keeps standby power supplied to the system. You must unplug the system before servicing.
There are two power supplies in the Archive Engine. It is important to connect both power supplies. It is recommended that each of the power supplies be attached to a separate UPS with built in surge protection and line conditioning.
Loading Qualification Media in Media Library (Generation 3)
Media Library Generation 3 systems include 2 pieces of Qualification Media per library. Before actively using the library, you must import the Qualification Media discs into each library. You can do this after configuring the Archive Engine server and Media Libraries.
For information on importing media, refer to the section, “ Importing Permanent Storage Spaces,” in the A3 Administrator’s Guide.
Active Archive Appliance (A3) v6.5 | PowerFile Confidential | Racking and Installation Guide |