Installing the Archive Engine

11

To attach the inner rails:

1.Attach Cto the left and right side of the chassis using screws Ewith the Allen wrench. Repeat this step on the other side of the chassis.

The inner rail is attached by four screws on each side. Note their relative positions in the diagram.

L

Latch stop

E

F G

C

Archive Engine (Generation 1)

2.Attach F to the left and right slides using screws G. Ensure the latch F is oriented with its spring arm located against its stop. (At top on right-hand side and at bottom on left-hand side). Repeat this step on the other side of the chassis.

Active Archive Appliance (A3) v6.5

PowerFile Confidential

Racking and Installation Guide

Page 19
Image 19
PowerFile A3 manual Archive Engine Generation