18

Installing the Archive Engine

Attaching the Outer Rails

The outer rails attach to the server rack and hold the server in place. The outer rails for the Archive Engine extend between 32 inches and 34 inches (or up to 40 inches with the extension).

To attach the outer rails:

1.Assemble the outer rail by attaching the short section of the rail to the outside of the long section of the rail. You must align the pins with the slides. Also, both bracket ends must face the same direction.

2.Adjust both the short and long brackets to the proper distance so that the rail fits snugly into the rack.

3.Secure the long bracket side of the rail to the front side of the rack with two of the M5x16 screws and the provided washers.

4.Secure the short bracket side of the rail to the rear side of the rack with two of the M5x16 screws and the provided washers.

5.Repeat steps for the other outer rail.

Secure to Front of Rack

Attach Outer

Secure to Rear of Rack

 

Rails Together

 

Archive Engine (Generation 2) Outer Rail Assembly Detail

Active Archive Appliance (A3) v6.5

PowerFile Confidential

Racking and Installation Guide

Page 26
Image 26
PowerFile A3 manual Attaching the Outer Rails, Archive Engine Generation 2 Outer Rail Assembly Detail