Powermatic 54HH, 54A operating instructions Introduction Specifications, Pre-wired

Introduction

This manual is provided by Powermatic covering the safe operation and maintenance procedures for the Powermatic Model 54A and 54HH Jointers. This manual contains instructions on installation, safety precautions, general operating procedures, maintenance instructions and parts breakdown. This machine has been designed and constructed to provide years of trouble free operation if used in accordance with instructions set forth in this manual. If there are any questions or comments, please contact your local supplier or Powermatic, or visit our web site: www.powermatic.com.

Specifications

Model		54A	54HH
Stock Number:
Jointer and Stand		1791279DXK	1791317K
Jointer only		2365013DX	1791317
Table Size (in.)		7-1/4 x 66	7-1/4 x 66
Table support		dove-tailed ways	dove-tailed ways
Cutterhead Style		straight w/ quick-set knives	helical
Knives		3 double-edged	40 four-sided inserts
Number of cutterhead rows		--	6
Cutterhead Speed (RPM)		6000	6000
Cuts per Minute		18,000	not applicable
Cutting capacity (in.)		1/2" x 6"	1/2” x 6”
Blade Size (in.)		6-1/16" x 3/4 x 5/64	0.10T x 0.59 x 0.59
Switch		push button	push button
Fence size overall (in.)		4 x 38	4 x 38
Fence tilt (degrees)		+/- 45	+/- 45
Stops		- 45, 45, and 90 degrees	- 45, 45, and 90 degrees
Table Surface Height (in.)		31-1/2	31-1/2
Motor	TEFC, 1 HP, 1 PH, 115/230V*, 60Hz		TEFC, 1 HP, 1 PH, 115/230V*, 60Hz
Overall Dimensions (LxWxH)(in.)		........................66 x 24 x 37-1/2	66 x 24 x 37-1/2
Jointer Bed Weight (lbs.)		254	254
Stand Weight (lbs.)		80	80

* (pre-wired 115V)

The above specifications were current at the time this manual was published, but because of our policy of continuous improvement, Powermatic reserves the right to change specifications at any time and without prior notice, without incurring obligations.

7