Powermatic PM2020 manual Unpacking, Contents of shipping container

6.0Unpacking

Open shipping container and check for shipping damage. Report any damage immediately to your distributor and shipping agent. Do not discard any shipping material until the Lathe is assembled and running properly.

Compare the contents of your container with the following parts list to make sure all parts are intact. Some parts can be found in separate boxes packed around the Lathe. Missing parts, if any, should be reported to your distributor. Read the instruction manual thoroughly for assembly, maintenance and safety instructions.

6.1Contents of shipping container

1Lathe Bed, with Headstock, Tailstock, & Tool Support Base – (A)

2Leg Assemblies – (B)

1 Guard – (C)

1Tool Support, 14” – (D)

1Face Plate, 3” – (E)

1Live Center – (F)

1Spur Center, 1” – (G)

1Index Pin – (H)

1Live Center Pin – (J)

1Knockout Rod – (K)

1Face Plate Wrench – (L)

1Tool Caddy – (M)

4Levelers – (N)

10Socket Hd. Cap Screws, 3/8” x 1-1/4” – (O)

10Lock Washers, 3/8” – (P)

8Flat Washers, 3/8” – (R)

1Owner's Manual (not shown)

1Warranty Card (not shown)

Read and understand the entire contents of this manual before attempting set-up or operation! Failure to comply may cause serious injury.

7