Unpacking
Open shipping container and any smaller boxes and check for shipping damage. Report any damage immediately to your distributor and shipping agent. Do not discard any shipping material until the planer is installed and running properly.
Compare the contents of your container with the following parts list to make sure all parts are intact. Missing parts, if any, should be reported to your distributor. Read the instruction manual thoroughly for assembly, maintenance and safety instructions.
NOTE: To remove the box from atop the planer table, loosen the table lock handle, push in the elevating handwheel (see Figure 3) and rotate the handwheel to lower the table.
Contents of the Shipping Container
1 Planer
1Dust Hood – (A)
4Foot Pads – (B)
1 Air Impact Screwdriver – (C)
1
5Star Point Screwdrivers – (E)
1Breaker Bar – (F)
1Air Valve – (G)
1Air Valve Mounting Bracket – (H)
1Air Valve Pressure Gauge – (J)
20Flat Head Spline Socket Screws, M6x14 – (K)
10Spline Bits,
10Replacement Knife Inserts – (M)
1Handle with Knob – (N)
3Open End Wrenches,
1 Reversible Screwdriver – (P)
4 Hex Wrenches, 3, 4, 5, and 8mm – (R)
8Button Head Socket Screws, M6x12 – (S)
8Lock Washers, M6 – (T)
8Flat Washers, M6 – (U)
1Operating Instructions and Parts Manual
1Warranty Card
Read and understand the entire contents of this manual before attempting
8
