Introduction
This manual is provided by WMH Tool Group covering the safe operation and maintenance procedures for a Powermatic Model WP2510 Planer. This manual contains instructions on installation, safety precautions, general operating procedures, maintenance instructions and parts breakdown. This machine has been designed and constructed to provide years of trouble free operation if used in accordance with instructions set forth in this manual. If there are any questions or comments, please contact either your local supplier or WMH Tool Group. WMH Tool Group can also be reached at our web site: www.wmhtoolgroup.com.
Specifications |
|
Model Number | WP2510 |
Stock Number | 1791303 |
Main Drive Motor | TEFC, 15HP, 3Ph, 230/460V |
Table Hoist Motor | TEFC, 1/2HP, 3Ph |
Maximum Cutting Width (in.) | 25 |
Maximum Cutting Thickness (in.) | 9 |
Full Width Cutting Depth (in.) | 1/8 |
Maximum Cutting Depth (in.) | 1/4 |
Minimum Planing Length (in.) | 10 |
Number of Knives, Helical Head | 168 |
Segmented Infeed Roll Diameter (in.) | 3 |
Steel Outfeed Roll Diameter (in.) | |
Cutterhead Speed (RPM) | 5,000 |
Cutterhead Diameter (in.) | |
Feed Rate (FPM) | |
Table Size (L x W)(in.) | |
Dust Port Diameter (in.) | 5 |
Shipping Weight (lbs.) | 1,760 |
Net Weight (lbs.) | 1,585 |
Overall Dimensions (L x W x H)(in.) | 42 x |
The above specifications were current at the time this manual was published, but because of our policy of continuous improvement, WMH Tool Group reserves the right to change specifications at any time and without prior notice, without incurring obligations.
7
