Powermatic WP2510 operating instructions Set Linear Correction, Enter Parameter Setttings Mode

9. Set Linear Correction

NOTE: Setting Linear Correction should be done in MM (metric) mode, not inches. This will ensure accurate readings for table movement.

Step 1: Press

Display

Step 2: Enter the value between 0.0001 and 9.9999

Step 3: Press	to confirm or press
	to clear.

10. Enter Parameter Setttings Mode

With this function, you can select each parameter to be locked or unlocked. When a parameter is locked, then the end-user can only see the value, but can not change it.

Step 1: Press

Display

Step 2: Enter the password.

Step 3: Use	to scroll through the parameters.
Step 4: Press	to lock or unlock.
On = unlock
Off = lock
Step 5: Press	to confirm or press	to clear.

29