Powerware 2500 manual Extended Battery Module Installation

INSTALLATION

Extended Battery Module Installation

C A U T I O N

A small amount of arcing may occur when connecting an EBM to the UPS. This is normal and will not harm personnel. Insert the EBM cable into the UPS battery connector quickly and firmly.

To install the optional EBMs:

1.If installing an EBM with an E/EH UPS model, skip to Step 4; otherwise, continue to Step 2.

2.Plug the EBM cable(s) into the battery connector(s) as shown in Figure 14. Up to four EBMs may be connected to the UPS.

3.Continue to “Plug-Receptacle UPS Installation” on page 25 or “Hardwired UPS Installation” on page 27.

UPS

EBM Cable

EBM

EBM

UPS Battery Connector

EBM Battery

Connectors

Figure 14. Typical EBM Installation (120V UPS Model Shown)

22EATON Powerware® 9125 Two-in-One UPS (2500/3000 VA) User’s Guide S 164201374 Rev D www.powerware.com