EATONPowerware®9125 Two-in-One UPS (2500/3000 VA) User’s Guide S164201374Rev D
www.powerware.com
63
Chapter 9 Troubleshooting
This section explains:
SUPS alarms and conditions
SHowtosilenceanalarm
SService and support

Audible Alarms and UPS Conditions

The UPS has an audible alarm feature to alert you of potential power
problems. Use Table 11 to determine and resolve the UPS alarms and
conditions.
NOTE Somealarms, such as the Overtemperature and Overload alarms, must be cleared by
shuttingdown and restarting the UPS (see page 65 for more information).
Flashing
Unlit
Lit
IndicatorLegend
Self-Test
Test/Alarm
ResetButton
BatteryService
SiteWiring Fault
Overtemperature
Overload
Figure46. Alarm Indicators

Silencing an Audible Alarm

Before silencing an alarm, check the alarm condition and perform the
applicable action to resolve the condition (see Table 11).
To silence the alarm for an existing fault, press the button. If UPS
status changes, the alarm beeps, overriding the previous alarm silencing.