UPS Operating Instructions

10.2.5 Single UPM Shutdown

To shut down a single UPM, perform the following procedure:

NOTE The UPM can be shut down only if remaining UPMs can support the critical load without being overloaded.

1.Press the CONTROLS pushbutton on the main menu bar on the UPM to be shut down. The System Controls screen appears.

2.Press the pushbutton to display System Controls Screen 2.

3.Press the PM OFF pushbutton on the System Controls menu bar.

The power module (PM) status indicates SHUTDOWN. The input and output contactors open, the battery breaker or disconnect is tripped, and the power module is turned off.

4.Open the input and bypass (if dual feed) feeder circuit breakers supplying the shutdown UPM.

NOTE The monitor screen continues to be active until the UPM is isolated from the critical bus.

W A R N I N G

Power is present inside the shutdown UPM cabinet due to connection to the critical bus, until the UPM output breaker is opened.

5.If it is necessary to isolate the UPM from the critical bus, open the module output breaker on the tie cabinet or distribution panel.

10.2.6Restarting a Single UPM

To restart a single UPM, perform the following procedure:

1.If the UPM was isolated from the critical bus, close the module output breaker on the tie cabinet or distribution panel.

2.Observe the UPM control panel display becoming active, indicating logic power. UPM logic is being powered from the critical bus.

3.Close the UPM input feeder circuit breaker.

4.If the UPM is dual feed, close the UPM Bypass input feeder circuit breaker.

5.Press the CONTROLS pushbutton on the main menu bar of the UPM. The System Controls screen appears.

6.On the System Controls screen, the power module (PM) status should indicate

SHUTDOWN.

Powerware® 9390 UPS (40–80 kVA) Installation and Operation Manual S 164201535 Rev C

10-11

Page 115
Image 115
Powerware 9390 operation manual Single UPM Shutdown, Restarting a Single UPM

9390 specifications

The Powerware 9390 is a high-performance uninterruptible power supply (UPS) designed for critical applications in data centers, telecommunications, and other industries requiring maximum uptime. This UPS system is renowned for its durability, efficiency, and advanced technological features, making it an ideal choice for environment-sensitive operations.

One of the standout characteristics of the Powerware 9390 is its modular architecture. This design allows for scalability, enabling businesses to tailor the power supply to fit their specific needs. Users can add or remove power modules as demand fluctuates, ensuring optimal performance without overspending on unnecessary capacity. The system is available in various power ratings, typically ranging from 40 kVA to 750 kVA.

Among the key technologies utilized in the Powerware 9390 is the Advanced Battery Management (ABM) system. This innovative feature helps extend battery life by monitoring and optimizing charging cycles. The ABM technology uses an intelligent three-stage charging process, significantly reducing battery wear while ensuring high availability of power during outages. This enhancement not only improves reliability but also lowers maintenance costs over time.

Energy efficiency is another hallmark of the Powerware 9390, as it incorporates double-conversion technology to maintain voltage stability. This ensures that sensitive electronic equipment is protected from surges and fluctuations in power supply. Additionally, the UPS offers high input power factor and low harmonic distortion, contributing to overall energy savings while minimizing the environmental impact.

The Powerware 9390 is equipped with advanced monitoring and management features that allow users to maintain complete control over their power infrastructure. An intuitive LCD display provides real-time metrics on system performance, battery status, and operational logs. Furthermore, the UPS can be integrated with network management systems, enabling remote monitoring and management via web interfaces.

In terms of safety characteristics, the Powerware 9390 adheres to rigorous industry standards, ensuring that it provides reliable performance under various operating conditions. Its robust construction and redundant components further enhance reliability, making it a popular choice in mission-critical environments.

In conclusion, the Powerware 9390 stands out as a leader in the UPS market, combining modular scalability, advanced battery management, energy efficiency, and robust safety features. Its ability to adapt to the needs of dynamic organizations while providing reliable power protection makes it an invaluable asset for any critical application. With its state-of-the-art technologies, businesses can depend on the Powerware 9390 for continuity, efficiency, and peace of mind.