C H A P T E R 2

SAFETY WARNINGS

I M P O R T A N T S A F E T Y I N S T R U C T I O N S

SAVE THESE INSTRUCTIONS. This manual contains important instructions that you should follow during installation of the UPS. Please read all instructions before operating the equipment and save this manual for future reference.

D A N G E R

This UPS contains LETHAL VOLTAGES. All repairs and service should be performed by AUTHORIZED SERVICE PERSONNEL ONLY. There are NO USER SERVICEABLE PARTS inside the UPS.

C A U T I O N

:Batteries can present a risk of electrical shock or burn from high short circuit current. Observe proper precautions.

:Proper disposal of batteries is required. Refer to your local codes for disposal requirements.

:This UPS contains its own energy source (batteries). The output receptacles may carry live voltage even when the UPS is not connected to an AC supply.

:Never dispose of batteries in a fire. Batteries may explode when exposed to flame.

:Never open or mutilate batteries. Released electrolyte is harmful to the skin and eyes, and may be extremely toxic.

:Use only the power supply cord provided with this UPS. The power cord is wired in accordance with National Electrical Code (NEC) specifications. Be sure the wall outlet to be used with the UPS is wired in accordance with these same specifications in order to avoid damage to your equipment. Be sure that overcurrent protection for the AC outlet is provided at the time of installation. Be sure the input plug is completely inserted into the wall outlet. Use a single-phase, three-wire, grounded AC outlet only.

:To reduce the risk of fire or electric shock, install this UPS in a temperature and humidity controlled, indoor environment, free of conductive contaminants. Ambient temperature must not exceed 104•F (40•C). Do not operate near water or excessive humidity (95% max).

Powerware® 9 Prestige Series User’s Guide (600 VA - 1800 VA) : www.powerware.com

9