Communication
UPS Serial Communications Menu
With the UPS Serial Communications (Main) Menu, you can view or select UPS communication modes, baud rates, and LAN configurations. To change or display the current communications configuration:
1.Connect the UPS serial port to a video monitor with a serial interface or to your computer’s serial port. If you are using OnliNet or LanSafe software, the UPS should already be connected to your computer.
2.Set your terminal so that it matches the baud rate of the UPS (usually 2400 baud, 8 bits, No parity, 1 stop bit). Refer to your terminal or operating system documentation for details on configuring your terminal communication settings.
3.At the terminal prompt, press
8366(5,$/ &20081,&$7,216 0(18 6(/(&7 23(5$7,21 02'(
'! ',63/$< &21),*85$7,21
! &217,18286 '803
! 32//(' '803
! 60$57 '803
$! $6&,, 7(50,1$/
%! 97 7(50,1$/
3 ! 35,17(5 '803
/! /$1 &21),*85$7,21
=! 6(7 %$8' 5$7(
4! 48,7 :,7+287 6$9,1* 1(: &21),*85$7,21
6 ! 6$9( $1' 5(67$57 (17(5 6(/(&7,21 ! ! !
4.Select a menu option by typing the corresponding letter or number key. All menu selections are single keystrokes and are not
D > Display Configuration displays the current communication settings and the new settings that you have selected prior to saving them. The new settings are not effective until you select save from the Main Menu.
48 | Powerware® 9 Prestige Series User’s Guide (600 VA - 1800 VA) : www.powerware.com |