Installation
LED Description
The functions of the ConnectUPS Web/SNMP Card are indicated by the Status and either the 10 Mb or 100 Mb LEDs, as listed in Table 1.
Table 1. LED Definitions
Status LED | 10 Mb or | Card Function Description |
| 100 Mb LED |
|
|
|
|
Flickering | On/Flickering | Normal operation with Ethernet traffic |
|
|
|
On | On | ConnectUPS Web/SNMP Card error |
|
|
|
Off | Off | UPS power low (no power to the |
|
| ConnectUPS Web/SNMP Card) |
|
|
|
Flashing | Flashing | No connection to UPS (alternate flashing as |
|
| the ConnectUPS Web/SNMP Card restarts) |
|
|
|
Configuration
You must configure the ConnectUPS Web/SNMP Card before you can use it. There are two ways to configure the card:
:locally through the serial communication port
:remotely using a Web browser or Telnet utility
Configuring the Card Locally
The card has a configuration program that you can access by using the supplied serial cable to connect the card to a terminal or a computer with a terminal emulation program.
If you choose to configure your card locally, see “Local
Configuration” on page 9.
ConnectUPSZ Web/SNMP Card (X and BD Models) User’s Guide : Rev A www.powerware.com | 7 |