Appendix
DIP Switch Description
DIP switch definitions for both types of the ConnectUPS Web/SNMP Cards are listed in Table 4.
Table 4. DIP Switch ModesSW1 | SW2 | Description |
|
|
|
Off | Off | Operational Mode (default) |
|
|
|
Off | On | BOOTP/DHCP Enable Mode (overrides the serial/Telnet |
|
| configuration) |
|
|
|
On | Off | Reserved |
|
|
|
On | On | Reserved |
|
|
|
Jumper 1 (JP1) Settings
The JP1 jumper is found on both the
Jumper Setting Definition
1 and 2 Allows admin to be entered as the password when the programmed Superuser password has been forgotten
3 and 4 Disables all changes to the card’s configuration
NOTE On the
32 | ConnectUPSZ Web/SNMP Card (X and BD Models) User’s Guide : Rev A www.powerware.com |