Local Configuration

3.Change any other options as needed for your particular configuration by typing the corresponding number shown in the menu (2 through 10). Each setting is described in the following sections.

4.Type 0 to return to the Main Menu.

5.Type 0 to exit the ConnectUPS Web/SNMP Card configuration. The ConnectUPS Web/SNMP Card automatically saves all settings after exiting the configuration function (see Figure 7).

NOTE The ConnectUPS Web/SNMP Card may take up to two minutes to establish communication with the UPS. Please wait before attempting communication with the card from a Web browser or network management system (NMS).

NOTE Telnet Operation – Once the card is reachable on the network, you can use a Telnet utility to adjust any of the configuration settings. The menus are identical to those seen during serial configuration and are password-protected for Superuser access only.

12

ConnectUPSZ Web/SNMP Card (X and BD Models) User’s Guide : Rev A www.powerware.com