Powerware BD, X Set Write Access Managers, Set Trap Receivers, Set IP Addresses of Primary and Secondary Date Server, UPS Event Actions

Local Configuration

Set Write Access Managers

For those users who intend to use an SNMP-compatible NMS to manage the ConnectUPS Web/SNMP Card, the IP address of the management station must be added to the list on the ConnectUPS Web/SNMP Card in order to receive read (get) or write (set) access rights. Community strings may be different for read or write access. Use this function to add or delete the IP address of the management station (option 3).

Set Trap Receivers

For those users who intend to use an SNMP-compatible NMS to manage the ConnectUPS Web/SNMP Card, the IP address of the machine intended to be the trap receiver must be added to the list on the ConnectUPS Web/SNMP Card. Use this function to add or delete the IP address of the trap receivers (option 4). This information is accessible via the HTTP interface for easy modification after the card is on the network.

Set IP Addresses of Primary and Secondary Date Server

Use this function to set the IP addresses of the primary and secondary date servers (option 5). This information is accessible via the HTTP interface for easy modification after the card is on the network.

Computer systems with the ConnectUPS Web/SNMP Card-compatible NetWatch client software are periodically monitored by the ConnectUPS Web/SNMP Card to maintain a consistent date and time with your network. The computers’ IP address must be listed as the Primary or Secondary Date Server.

UPS Event Actions

Use this function to configure actions that the ConnectUPS Web/SNMP Card performs during AC Fail and Low Battery events (option 6). This information is accessible via the HTTP interface for easy modification after the card is on the network.

ConnectUPSZ Web/SNMP Card (X and BD Models) User’s Guide : Rev A www.powerware.com