Local Configuration
Set the IP Address, Gateway Address and MIB System Group
Use this function (option 1) to set the IP address, the gateway address, or the management information base (MIB) parameters of the card, as listed in Table 2.
Table 2. Parameters with Examples
No. | Function | Description | Example |
|
|
|
|
1 | IP Address | IP address of the card | 192.72.173.188 |
|
|
|
|
2 | Gateway | Default IP address of the network gateway | 192.72.173.254 |
| Address |
|
|
|
|
|
|
3 | Network Mask | Subnet mask setting | 255.255.255.0 |
|
|
|
|
4 | sysContact | System contact string of MIB (up to 127 | Powerware |
|
| characters) |
|
|
|
|
|
5 | sysName | System name parameter for MIB (up to 127 | ConnectUPS Web/SNMP |
|
| characters) | Card |
|
|
|
|
6 | sysLocation | System location parameter for MIB (up to | TEST LAB |
|
| 127 characters) |
|
|
|
|
|
Set Web/SNMP Card Control Group
For those users who intend to use BOOTP/DHCP, Telnet, or secure HTTP in order to configure, control, update, or manage the card, certain control parameters must be enabled or disabled. Use this function to modify those parameters (option 2).
NOTE To prevent unauthorized viewing of the Web pages presented by the ConnectUPS Web/SNMP Card, use this function to enable HTTP Security Control.
NOTE To obtain an IP address using BOOTP/DHCP (instead of serial configuration), set DIP Switch 2 on the front panel to the ON position (OFF is the default).
14 | ConnectUPSZ Web/SNMP Card (X and BD Models) User’s Guide : Rev A www.powerware.com |