Powerware BD, X NOTE, Set Values, Set Values, Subnet Mask, Date and Time, Gateway Address, ConnectUPS Web/SNMP Card IP Address

Remote Configuration

3.Select and edit the ConnectUPS Web/SNMP Card IP Address.

4.Select and edit the Gateway Address for the network.

5.Select and edit the Subnet Mask of the network.

6.Select Set Values to save the new settings.

NOTE If you changed the IP address in Step 3, you must restart the browser using the new IP address (see page 18) to restore communication with the ConnectUPS Web/SNMP Card. Repeat Steps 1 and 2 to continue the configuration.

7.Select Date and Time from the menu at the top of the page.

8.Enter the appropriate date and time information in the specified format.

9.Select Set Values to save the date and time settings.

The ConnectUPS Web/SNMP Card is now configured for operation on your network. Refer to the remainder of this user’s guide and the online help for detailed information about each menu selection.

20 ConnectUPSZ Web/SNMP Card (X and BD Models) User’s Guide : Rev A www.powerware.com