Precor 718e owner manual Remove bolts from lower resistance cylinder mounts

Diagram 8
Attach resistance cylinder to
upright support
Upper axle
Spacer
Washer
Bolt
Upright support
Adjustment portion
5	4	3	2	1
Resistance cylinder
Indicator arrow

5.Attach Resistance Cylinders to Upright Support. (Diagram 8) Remove the bolt, washer and spacer from the upper axle using your fingers or the hex key (G) provided. With the indicator arrow facing toward the footpad, slide the top of the resistance cylinder onto the upper axle. Place the washer and spacer on the bolt. Re-insert the bolt and tighten securely using the hex key provided. Repeat this same step to attach the other resistance cylinder.

Diagram 9

Remove bolts from lower resistance cylinder mounts

Bolt

Washer

U-shaped mount

Nut

Stair arm

6.Connect Resistance Cylinders to Stair Arms. (Diagrams 9 and 10) The washers, nut, and bolt need to be removed from the lower resistance cylinder mount (U-shaped mount) before connecting the resistance cylinders. See Diagram 9. Remove the bolt using your fingers or the supplied hex key (G). To mount the lower resistance cylinders to the stair arms, take the following steps:

Note: Perform the following steps on one stair arm at a time.

Page 10