![Adjustment knob Resistance cylinder mount](/images/new-backgrounds/187752/18775229x1.webp)
Diagram 18
Measure the distance of the resistance cylinders from the mounts
Adjustment knob Resistance cylinder mount
1/4" to 1/2"
5 | 4 | 3 | 2 | 1 |
| ||||
|
| |||
|
|
|
g.Press the right footpad down onto the rear crossbar. Let the left stair arm move up into its highest position (away from the rear crossbar). Check the distance between the top of the resistance cylinder on the left stair arm and the upper axle. It should be between 1/4 to 1/2 inches (.1 to .2 centimeters). See Diagram 18. If the distance is correct, you have installed the rope properly. If the adjustment knob touches the resistance cylinder mount, you will need to replace the rope and readjust the length.
Note: To obtain a new rope call your local Precor dealer at
PRECOR.
Every time you use your climber, make sure that all
Page 15