C O M M E R C I A L P R O D U C T S D I V I S I O N
Diagram 19 Insert the front end cap.
Upright support
Front end cap
CAUTION: If you purchased the chest strap option, be sure to test the heart rate display (refer to page 24) prior to inserting the front end cap.
23.Once you have checked that the heart rate feature is working properly, insert the front end cap (found in the Hardware kit) into the base assembly.See Diagram 19. Insert the front end cap into the base tube. Make sure that the cable does not get pinched by the end cap. If necessary, use a rubber mallet to secure the end cap.
REMOVING THE LOCKING PIN
CAUTION: Do not allow children on the EFX. Be aware that injuries can occur from the roller arm and handlebar movement. Always use the locking pin to secure the roller arm when the EFX is not in use.
Diagram 20 EFX Locking pin.
Insert the locking pin when you are finished working out or when you leave the EFX for an extended length of time.
Storage location
The locking pin secures the roller arm and keeps it from traveling up or down the ramp. Pull firmly on the pin to slide it out of the ramp. A lanyard is attached to the locking pin and ramp. Refer to Diagram 20.
Store the locking pin underneath the ramp once it is removed from the roller arm. See inset in Diagram 20.
page 23
