Precor EFX534i t User Setup Prompts, Setup Prompts Description, Select, QuickStart, Enter

C O M M E R C I A L P R O D U C T S D I V I S I O N

USER SETUP PROMPTS

Precor banner: The Precor banner and program profiles appear in the center display. Always start a workout at the Precor banner.

Important: Because the EFX is self-powered, the Precor banner does not appear until the user maintains a stride rate above 40 strides per minute. Note that there is an exception to this rule. If power is being supplied through the optional power adapter, then pedaling is not required prior to entering a program. Refer to page 7, EFX® Self-powered Features.

Setup prompts appear in the center display prior to your workout. You address each prompt using the keypad keys.

Keypad use during
Setup Prompts	Description
▼ or ▲	Scrolls through the selections. The longer the key is held
	down, the faster the selections scroll past.
Select	Acts the same as the Enter key.
Reset	Exits the Setup Mode and returns the display to the
	Precor banner.
QuickStart	Bypasses any remaining Setup prompts and accesses
	the program selection. Refer to Using QuickStart During
	the Setup Prompts on the opposite page.
Enter	Submits the displayed selection and moves onto the next
	Setup prompt.

PROGRAM prompt: The EFX provides 5 program selections. The first program se- lection to appear on the display is MANL (Manual program). Use any ▼▲ key to change the selection. Press Enter to accept the displayed name. Have the user

referto the display label on the console to determine which abbreviations represent the different program selections. For a description of the programs, refer to page 42.

Important: If you press QuickStart while a program selection is displayed, the program begins. Refer to Using QUICKSTART during the Setup Prompts.

Note: If no key press is detected for ten seconds, the display prompts the user on what to do next. If no key press is detected for two minutes or the RESET key is pressed, the display returns to the banner.

Workout Time prompt: A default value of 30 minutes (or the custom settings limit, whichever is less) appears. Use any ▼▲ key to change the workout time. For MANL, XTR, and INTV programs, the workout time may be set as low as one minute or as high as the custom settings limit. Press Enter or QuickStart to accept the displayed value.

page 30