The Initial Setup menu | 08 |
Note
•If you want to cancel before tuning has finished, press ENTER.
•You can manually tune and skip blank channels using the Manual CH Setting, below.
Manual CH Setup
• Default setting: n/a
Tuner
Auto CH Setup | Channel |
|
Manual CH Setup | Skip |
|
Guide CH Setup | AFT |
|
|
|
|
From the manual channel setup screen you can manually fine tune channels and set channels to skip.
The skip function lets you skip channels where there is no station so that as you change channels using the CHANNEL +/– buttons or the number buttons, you only change to channels that have a station.
1Select ‘Manual CH Setup’ to display the manual channel setup screen.
Manual CH Setup
Auto CH Setup | Channel | 002 |
|
Manual CH Setup | Skip | Off |
|
Guide CH Setup | AFT | On |
|
|
|
|
|
• Use the | buttons to change the guide channel |
for setting. |
|
•If you want to skip the displayed channel (because there is no station assigned to that channel), change the Skip setting to On.
•If you want to manually tune the displayed channel, change the AFT (Auto Fine Tuning) setting to Off, then move down to Level to manually tune to a station.
Manual CH Setup
Auto CH Setup | Channel | 002 |
| |
Manual CH Setup | Skip |
| Off |
|
Guide CH Setup | AFT |
| Off |
|
| Level | +32 |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2 To return to the Initial Setup menu, press ENTER.
Guide CH Setup
• Default setting: n/a
Guide channels are used by the VCR Plus+ system so that the channel number specified in the VCR Plus+ programming numbers can be guaranteed to correspond to the correct station.
1 Select ‘Guide CH Setup’, then ‘Guide CH’.
Tuner
Auto CH Setup | Guide - CH |
|
Manual CH Setup |
|
|
Guide CH Setup |
|
|
|
|
|
|
|
|
2Assign channel numbers to the guide channels as necessary.
Look in your TV guide to see which channel numbers should be assigned to which guide channels.
Guide CH Setup
Auto CH Setup | Guide - CH |
| 1/20 |
| |
Manual CH Setup | 1 | 0 0 6 | 6 | - - - - |
|
Guide CH Setup | 2 | - - - - | 7 | - - - - |
|
| 3 | - - - - | 8 | - - - - |
|
| 4 | - - - - | 9 | - - - - |
|
| 5 | - - - - | 10 | - - - - |
|
|
|
|
|
|
|
• Use the | buttons to change the guide channel |
for setting. |
|
• Use the | buttons to change the channel |
number. |
|
•Use the PREV / NEXT button to display the previous/ next 10 guide channels.
3To return to the previous screen, press ENTER or
RETURN.
OSD Language
•Default setting: English
Basic
Basic | Clock |
|
Disc | Tuner |
|
Video | OSD Language |
|
Audio | Display |
|
Recording | Remote Control |
|
Playback | Setup Navigator |
|
|
|
|
|
|
|
This sets the language of the
English
47
En
