Precor RBK 615, UBK 615 owner manual Routing the data and heart rate cables

Assembling the Exercise Bike 33

4.Route the flat, black base unit data cable to the left of the mounting bracket and about three-quarters of the way up the left side of the console, as shown in the following figure. Attach the base unit data cable to the eight-conductor modular jack labeled LOWER BOARD CONNECTION.

Figure 17: Routing the data and heart rate cables

5.Attach the twisted, red-and-black heart rate sensor cable to the four-pin connector on the heart rate circuit board at the lower right corner of the console.

Note: The connectors can fit together in only one way. There may also be a 10-pin connector labeled HEART RATE on the console, but it is not compatible with this equipment.

Important: If you are installing a Cardio Theater screen or receiver, complete the Cardio Theater installation before you reattach the console’s rear cover.