42

Assembling and Maintaining the RBK 615 Recumbent Exercise Bike

Informational Displays Prior to Shutdown

The equipment saves its battery charge by moving into a shutdown mode. If the user does not maintain the minimum rate of motion, a 30-second shutdown process begins.

In this mode, the console displays a countdown indicator and ignores all keypresses. If no movement is detected or the rate of motion remains below the minimum, the indicator changes as the countdown continues.

Note: The user can resume exercising before the countdown period elapses and the workout will continue from the point at which it was paused.

Important: If the equipment is connected to a CSAFE master device, it follows a slightly different shutdown process. Ten seconds before the equipment shuts down, it ends the exercise session and displays a reset message while it disconnects from the CSAFE master device. It ignores all keypresses during these last ten seconds.

Symptoms of a Low Battery

If no one has used the equipment for an extended period of time, the battery may need recharging.

Symptoms of a low battery include the following:

A flickering or erratic display

Loss of user and program information after the user stops exercising, without any display of a workout summary or a notification of pending shutdown

Inability to decrease the incline setting (if any)

Important: To maintain a constant power source, use the optional power adapter.

Page 96
Image 96
Precor UBK 615, RBK 615 owner manual Informational Displays Prior to Shutdown, Symptoms of a Low Battery