Precor UBK 615, RBK 615 Required Tools, Installing the Stabilizers, To install the stabilizers

20 Assembling and Maintaining the RBK 615 Recumbent Exercise Bike

Required Tools

6 mm hex wrench

10 mm hex wrench

⁵₃₂-inch hex wrench

13 mm open-end, box, or socket wrench

14 mm open-end, box, or socket wrench

#2 Phillips screwdriver

Wire cutter

Fish tape

Installing the Stabilizers

The two stabilizers containing the feet of the bike are detached for shipment. Before performing any other assembly tasks, bolt the stabilizers onto the main frame of the bike.

Note: The front stabilizer includes two wheels to assist in positioning the bike.

To install the stabilizers:

1.Place the rear stabilizer underneath the bracket at the rear of the bike.

Figure 2: Rear stabilizer installation