Assembling the Exercise Bike | 23 |
Attaching the Seat Back and Bottle Holder
While the equipment is in use, the seat back flexes to support users of different shapes and sizes. Underneath the seat back, the bottle holder accommodates both
Note: We recommend having a second person assist you when you perform the following procedure.
To attach the seat back:
1.While your assistant holds the seat back assembly, feed the heart rate sensor cable through it. Pass the cable into the seat back support through the opening at its base, then out through the opening in the handlebar bracket as shown in the following figure.
Important: Do not allow the cable to be pinched, crimped, or
creased. |
Figure 6: Heart rate sensor cable routing
2.Insert the lower front edge of the seat back assembly under the seat base.
