Chapter 3 Consumable Replacement

Replacing The Developing Unit

CAUTION Do not replace the developing unit unless you have been trained to do so. Be careful not to damage the sensors while cleaning the developing unit. (If damage occurs, contact your service representative.)

Removal

1.Turn the power switch OFF.

2.Open the printer upper doors. (See page 42.)

3.Open the waste toner recovery unit. (See page 46.)

4.Rotate the developing unit lever fully clockwise so that it is pointing straight up. This separates the developing unit from the photoreceptor drum.

 

1

Legend:

1)

Lever

56

Page 56
Image 56
Printronix L5020 manual Replacing The Developing Unit